The broadcast antenna connects to the Inside port on the cell signal booster via a run of coax cable. The cell signal booster uses a broadcast antenna to communicate with cell phones and other cellular devices inside your home. Top Signal EDGE dome (left) and EDGE panel (right) antennas have high gain, multiple mounting options, and a modern design aesthetic. Omni antennas don’t need to be tuned (adjusted until they receive the strongest signal), so they are easier and faster to set up than directional antennas.įor more help choosing the right exterior antenna, see our Knowledge Base article, “ Should I use a directional or omnidirectional outside antenna?” The inside antenna Omni donor antennas work best when you don’t have a direct line of sight to a cell tower or you want to boost signal for multiple carriers from two or more towers in different directions.

An omnidirectional antenna communicates with every cell tower in range within a 360° field of view.Directional antennas provide higher signal gain with less noise, so they work best when outside signal is very weak or your carrier’s signal is being drowned out by another carrier’s tower that’s close to your house. A directional antenna is your best option if you only need to boost the signal from one carrier and you have a good line of sight to the cell tower, without hills, trees, buildings, and other obstacles in your path. A directional antenna ( an LPDA, a Yagi, or a panel) points at a specific cell tower.There are two different types of donor antennas: You can bring that cable into the house through a vent, another existing opening, or a penetration point you create. The donor antenna connects to the Outside port on the cell signal booster via a run of coax cable. You can also mount this antenna on a pole or tower next to your home.

You’ll usually mount the donor antenna on your roof, high enough so that it has an unobstructed line of sight to one or more cell phone towers. The cell signal booster uses a donor antenna to send and receive signal from the cell tower. The outside antennaĭirectional (left) and omnidirectional (right) outside antennas The booster is the only component in the system that requires electrical power.Ī cellular booster has LED lights, an LCD display, or a smartphone app that tells you how it’s performing and if there are any problems that you need to address by changing the locations of the antennas. The booster’s power supply plugs into a standard 120-volt AC wall socket. Most cell signal boosters have two ports-one for an outside antenna and one for an inside antenna.

As booster models increase in power and coverage area, they go up in price: The weaker the available outside signal and/or the more area you need to cover inside your home, the more powerful the booster has to be and the higher the price you can expect pay. It’s a two-way ( bidirectional) amplifier that receives, amplifies, and broadcasts signal to and from cell towers (outside) and to and from cell phones (inside).ĭifferent boosters provide different levels of power to cover apartments and small homes or large homes. The cell signal booster is the heart of the system. The weBoost Home Complete cell signal booster for large homes

Cell signal booster for home